Sbf-325; Sdd-320; 2Tap Pan Delay - Roland Groovebox MC-707 Reference Manual

MFX/IFX Parameters

73 SBF-325

This effect reproduces Roland's SBF-325 analog flanger.
It provides three types of flanging effect (which adds a metallic
resonance to the original sound) and a chorus-type effect.
L in
SBF-325 SBF-325
R in
Parameter Value
FL1
FL2
Mode
FL3
CHO
Rate OFF, ON
(sync sw)
Rate 0.02–5.00 [Hz]
(Hz)
Note
Rate
(note)
& "Note" (p. 120)
Depth 0–127
Manual 0–127
Feedback 0–127
CH-R Mode Phase
NORM, INV
CH-L Phase
CH-R Phase
Level 0–127

74 SDD-320

This models Roland's DIMENSION D (SDD-320).
It provides a clear chorus sound.
L in
SDD-320 SDD-320
R in
Parameter Value
1, 2, 3, 4, 1+4, 2+4,
Mode
3+4
Low Gain -15–+15 [dB]
High Gain -15–+15 [dB]
Level 0–127
114
L out
R out
Explanation
Types of flanging effect
A typical mono flanger
A stereo flanger that preserves the stereo
positioning of the original sound
A cross-mix flanger that produces a more
intense effect
A chorus effect
If this is ON, the rate synchronizes with the
tempo of the rhythm.
& "TEMPO" (p. 52)
Modulation frequency of the flanger effect
Modulation depth of the flanger effect
Center frequency at which the flanger effect
is applied
Amount by which the flanging effect is
boosted
If Mode is CHO, this setting is ignored.
Phase of the right channel modulation:
Normally, you will leave this at Normal
(NORM).
If you specify Inverted (INV), the modulation
(upward/downward movement) of the right
channel is inverted.
Phase when mixing the flanging sound with
the original sound
NORM: normal phase
INV: inverse phase
Output Level
L out
2-Band EQ 2-Band EQ
R out
2-Band EQ 2-Band EQ
Explanation
Switches the mode.
Gain of the low range
Gain of the high range
Output Level

75 2Tap Pan Delay

L in
Double Tap Double Tap
Delay Delay
Feedback
R in
Parameter Value
Delay Time OFF, ON
(sync sw)
Delay Time 1–2600 [msec]
(msec)
Note
Delay Time
(note)
& "Note" (p. 120)
Delay Feedback -98–+98 [%]
200, 250, 315, 400, 500,
630, 800, 1000, 1250,
Delay HF Damp 1600, 2000, 2500, 3150,
4000, 5000, 6300, 8000,
BYPASS [Hz]
Delay 1 Pan L64–63R
Delay 2 Pan L64–63R
Delay 1 Level 0–127
Delay 2 Level 0–127
Low Gain -15–+15 [dB]
High Gain -15–+15 [dB]
Balance D100:0W–D0:100W
Level 0–127
Balance D
Delay 1
Balance W
Delay 2 Balance W
Balance D
Explanation
If this is ON, the delay synchronizes with the
tempo.
Adjusts the delay time from the direct sound
until the second delay sound is heard.
Adjusts the proportion of the delay sound
that is fed back into the effect. Negative (-)
settings will invert the phase.
Adjusts the frequency above which the delay
sound fed back to the effect is filtered out
(BYPASS: no cut).
Stereo location of Delay 1
Stereo location of Delay 2
Volume of delay 1
Volume of delay 2
Gain of the low range
Gain of the high range
Adjusts the volume balance between the
sound that is sent through the delay (W) and
the sound that is not sent through the delay
(D).
Output Level
L out
R out