Inst Aenv - Roland Groovebox MC-707 Reference Manual

INST AENV

Parameter Value
Env Time 1 Velocity
-100–+100
Sens
Env Time 4 Velocity
-100–+100
Sens
Env Time 1–4 0–1023
Env Level 1–3 0–1023
Explanation
Specify this if you want keyboard dynamics to
affect the AMP envelope's Time 1. If you want
Time 1 to be speeded up for strongly played
notes, set this parameter to a positive (+)
value. If you want it to be slowed down, set
this to a negative (-) value.
Specify this if you want key release velocity to
affect the AMP envelope's Time 4. If you want
Time 4 to be speeded up for quickly released
notes, set this parameter to a positive (+)
value. If you want it to be slowed down, set
this to a negative (-) value.
Specify the AMP envelope times (Time 1–
Time 4). Higher settings lengthen the time
until the next volume level is reached. (For
example, Time 2 is the time over which Level
1 will change to Level 2.)
Specify the AMP envelope levels (Level 1–
Level 3).
These specify the amount of change at
each point relative to the reference volume
(the partial level value specified in the Amp
screen).
T1 T2 T3 T4
Level
L1 L2 L3
Note on Note o
T: Time L: Level
Time
Parameter List
79