Table of Contents
Advertisement
5 SEQUENCE INSTRUCTIONS
5.7.2 No operation (NOP, NOPLF, PAGE n)
Internal Devices
Set
(System, User)
Data
Bit
Word
[Instruction Symbol] [Execution Condition]
NOP
NOPLF
PAGE n
[Functions]
NOP
(1) This is a no operation instruction that has no impact on any operations up to that point.
(2) The NOP instruction is used in the following cases:
(a) To insert space for sequence program debugging.
(b) To delete an instruction without having to change the number of steps. (Replace the
instruction with NOP)
(c) To temporarily delete an instruction.
NOPLF
(1) This is a no operation instruction that has no impact on any operations up to that point.
(2) The NOPLF instruction is used when printing from a peripheral device to force a page change
at any desired location.
(a) When printing ladders
• A page break will be inserted between ladder blocks with the presence of the NOPLF
instruction.
• The ladder cannot be displayed correctly if an NOPLF instruction is inserted in the midst
of a ladder block.
Do not insert an NOPLF instruction in the midst of a ladder block.
(b) When printing instruction lists
• The page will be changed after the printing of the NOPLF instruction.
(3) Refer to the Operating Manual for the peripheral device in use for details of printouts from
peripheral devices.
5 - 52
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Usable Devices
MELSECNET/10(H)
File
Direct J \
Register
Bit
Word
QCPU
PLC CPU
Process CPU
Basic
High Performance
Special
Index
Function
Register
Module
Zn
U \G
"NOP" is not displayed in ladder display.
NOP
NOPLE
PAGE n
MELSEC-Q/QnA
QnA
Q4AR
Constant
Other
K, H
5 - 52
Advertisement
Table of Contents
