Mitsubishi MELSEC QCPU Programming Manual page 207

6 BASIC INSTRUCTIONS
[Program Example]
(1) The following program adds 1 to the data at D0 and D1 when X0 is ON.
[Ladder Mode]
(2) The following program adds 1 to the data set at X10 to X27 when X0 goes ON, and stores the
result at D3 and D4.
[Ladder Mode]
(3) The following program subtracts 1 from the data at D0 and D1 when X0 goes ON.
[Ladder Mode]
(4) The following program subtracts 1 from the data set at X10 to X27 when X0 goes ON, and
stores the result at D3 and D4.
[Ladder Mode]
6 - 56
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
[List Mode]
Steps Instruction
[List Mode]
Instruction
Steps
[List Mode]
Steps Instruction
[List Mode]
Steps Instruction
MELSEC-Q/QnA
Device
Device
Device
Device
6 - 56