Appendix H Specifications - HP t730 Thin Client Troubleshooting Manual

H Specifications
For the latest specifications or additional specifications on the thin client, go to
quickspecs/ and search for your specific thin client to find the QuickSpecs.
Item
Dimensions
Width
Depth
Height (without stand)
Height (with stand)
Temperature Range (fanless design)*
Operating**
Nonoperating
(max. rate of change is 20°C per hour or 36°F per hour)
*Specifications are at sea level with altitude derating of
1°C/300 m (1.8°F/1000 ft) to a maximum of 3 Km (10,000 ft),
with no direct, sustained sunlight. Upper limit may be limited
by the type and number of options installed.
Relative Humidity (non-condensing)
Operating
(max. wet bulb temperature is 28°C or 84.2°F)
Nonoperating
(max. wet bulb temperature is 38.7°C or 101.6°F)
Maximum Altitude (unpressurized)
Operating
(max. allowed rate of change is 457 m per minute or 1500 ft
per minute)
Nonoperating
(max. allowed rate of change is 457 m per minute or 1500 ft
per minute)
Power Supply
Operating Voltage Range
Rated Line Frequency
Power Output (maximum)
Rated Output Current (maximum)
Output Voltage
Value
65 mm
220 mm
240 mm
250 mm
10°C to 40°C
-30°C to 60°C
** The operating temperature range when the thin client is
attached to a flat panel using the HP Quick Release is 10°C
to 35°C (50°F to 95°F).
3048 m
9144 m
http://www.hp.com/go/
Value
2.56 in.
8.66 in
9.45 In
9.84 in.
50°F to 104°F
-22°F to 140°F
10% to 90%
5% to 95%
10,000 ft
30,000 ft
100 VAC to 240 VAC
50 Hz to 60 Hz
85 W
4.36 A
+19.5 V dc
51