Mitsubishi Electric Melsec Q Series User Manual page 66

2 USING THE E-MAIL FUNCTION
2 - 38
(2) When monitoring a device
(a) When any of the results of the device monitoring matches the monitoring
condition among the devices having the conditions designated on the news
setting screen, the Subject and attached file, or the Subject and main text
will be sent.
(b) The following shows the contents for the Subject sent.
No. " ··· "
(c) All device values for the number of registered points designated on the
news setting screen are recorded in the attached file or main text.
The size of the data recorded in the attached file or main text is calculated
as follows:
Information of bit devices:
Information of word devices:
Registered points (number of devices)
1 This is the number automatically added each time an Ethernet module sends an
e-mail. The numbers are counted up from 1. When the number reaches
4294967296, the number is cleared to 0. Then the numbers are counted up from
0 again to 4294967296.
" " = " ··· " · · ·
Monitoring
value
Condition match device
No. of transmissions( 1)
Reqistered points (number of bits)
(Round up to a whole number)
MELSEC-Q/L
Condition match device
for condition mached,
monitoring value
16 x 2 bytes
2 bytes
2 - 38