Mitsubishi Electric Melsec Q Series User Manual page 157

5 WHEN USING FILE TRANSFER FUNCTIONS (FTP SERVER)
5 - 24
mls
[Function]
[Designation format]
[Designation example 1]
[Designation example 2]
[Caution]
[Similar function]
mput
[Function]
[Designation format]
[Designation example]
[Caution]
Stores the file names of the files stored in a CPU module into a
FTP client-side file as log data.
mls transfer source drive name:\ transfer destination file path
name
To store the file names of the files stored in the RAM area of
memory card to the file S990901F.LOG:
mls 1:\ S990901F.LOG
To store the file names of the files in the memory where the
parameter file used for the current operation of QCPU is stored
to the file S990901F.LOG:
mls \ S990901F.LOG
• Always designate "\" directly after the drive name of the
transfer source.
• When designating the transfer destination file path (FTP client
side), always designate the transfer source drive name.
• When the transfer destination file path is not designated, the
file name set by the FTP application on the FTP client side is
used to store the file.
• The transfer destination is the connected current directory of
the FTP startup connection.
mdir
Writes a file to a CPU module.
When writing multiple files, the file name and extension are
designated using wild cards ( or ?).
When writing multiple files, the send confirmation is performed
for each file transfer.
mput TRANSFER source file path
When writing all files with extension "QPG":
mput .QPG
• The transfer destination is the memory where the parameter
file used for the current operation of a CPU module is stored.
The destination file name is the same as the file name on the
FTP client side.
• See sections 5.5 and 5.6.1.
MELSEC-Q/L
5 - 24