Processing Procedure Of The E-Mail Function - Mitsubishi Electric Melsec Q Series User Manual

2 USING THE E-MAIL FUNCTION

2.5 Processing Procedure of the E-mail Function

2 - 9
The following flowchart illustrates the procedure that is required before sending and
receiving e-mails:
When DNS is not used
Register the mail address of the local station's Ethernet module
When sending/receiving e-mails using
the programmable controller CPU
Register the mail address of
the external device
(without news setting)
See Section 2.6 (3)
Reset the CPU, or Stop and Run the CPU
1
Send/receive
data as an attached
main text of e-mail
file of e-mail
See Section 2.7 See Section 2.8
1 The open and close processing of
the communication line for
sending/receiving e-mails is
automatically executed by
the Ethernet module.
Start
When DNS is used
Register the DNS server
Register the mail address of
the external device
(with news setting)
Set the news condition
Read the CPU
1
Send data as
Send E-mail
(news information)
MELSEC-Q/L
See Section 2.6 (1)
See Section 2.6 (2)
When sending e-mails using
the CPU monitoring function
See Section 2.6 (3)
See Section 2.9.1
information
Unmatched
News
Performed by
condition
matching
the Ethernet module
Matched
1
2 - 9