Mitsubishi Electric Melsec Q Series User Manual page 40

2 USING THE E-MAIL FUNCTION
Item name
Password
Mail Address
General
Check Received Mail
Setting
Enquiry Interval
SMTP Server
Name
Send Mail
Setting
Input format
Mail Server
IP Address
Name
POP Server Name Set the receive mail server name
Receive Mail
Input format
Setting
IP Address
2 - 12
(2) E-mail setting
[Purpose of setting]
Perform the setting to use the e-mail function.
[Start procedure]
Network parameter setting screen  E-mail Setting
[Setting screen]
[Setting item]
Set the password to the mail server
Set the mail address for the Ethernet module
Select whether or not to make inquiries to the incoming mail
server regarding the receiving status
Set the time interval and unit for making inquiries to the
incoming mail server
Set the send mail server name
Select the input format of the send mail server's IP address
Set the IP address of send mail server
Select the input format of the receive mail server's IP
address
Set the IP address of the receive mail server
Description of setting item
MELSEC-Q/L
Setting range/option
Up to 63 characters
Up to 256 characters
• Check mark
(Inquire)
• No check mark
(Do not inquire)
• 30 s to 24 h
• h/min/s
Up to 256 characters
• DEC
• HEX
00000001 to FFFFFFFE
H H
Up to 256 characters
• DEC
• HEX
00000001 to FFFFFFFE
H H
2 - 12