Jp/Gp.read - Mitsubishi Electric Melsec Q Series User Manual

6 DEDICATED INSTRUCTIONS

6.4 JP/GP.READ

Set
Internal device
data
Bit Word
(S1) —
(S2) —
(D1) —
(D2)
The following format can be used only when the local station is a Universal model QCPU or an LCPU.
Set data
Set data
Network number of the local station (1 to 239, 254)
Jn 254: The network designated by the valid module during other station
Start I/O signal of the local station's Ethernet module.
Un
(00 to FE
(S1) Head device of the local station that stores control data.
(S2) Head device of the target station from which data is read.
(D1) Head device of the local station that stores data read.
Local station device that is turned on for one scan by completion of the
(D2) instruction.
(D2) + 1 turns on if the instruction execution completes abnormally.
6 - 13
This instruction reads data from word devices of other stations.
Link direct device
File register
Bit
1
1 T, C, D, W, ST, SD, or SW can be used.
Description
access.
: The higher 2 digits of a 3-digit I/O signal.)
H
The local devices and the file register for each program cannot be used as devices
used in setting data.
Applicable device
Intelligent
J \ function module
device U \G
Word
MELSEC-Q/L
Constant
Index register Zn
K, H, $
—
—
—
—
Set by
User
Character string
User, system
User
System
Others
Data type
Binary 16 bits
Device name
Bit
6 - 13