Mitsubishi Electric Melsec Q Series User Manual page 179

6 DEDICATED INSTRUCTIONS
Program example
6 - 12
The following example shows a program that sends e-mails.
(1) When sending e-mail as an attached file
This program performs e-mail transmission processing using the send command
(X20).
Processing program when normal completion
Processing program when abnormal completion
(2) When sending e-mail as main text
This program performs e-mail transmission processing using the send command
(X20).
Processing program when normal completion
Processing program when abnormal completion
When I/O signals of the Ethernet module are X/Y00 to X/Y1F
When the I/O signals of the Ethernet module are X/Y00 to X/Y1F
MELSEC-Q/L
Designate ASCII as the send
data format.
Designate the send destination
number.
Designate the send data length.
Designate the subject length.
Designate subject.
Designate the attached file.
Send the e-mail.
Designate main text as the
send data format.
Designates the send destination
number.
Designate the send data length.
Designate the subject length.
Designate Subject.
Designate the main text.
Send the e-mail.
6 - 12