Mitsubishi Electric Melsec Q Series User Manual page 45

2 USING THE E-MAIL FUNCTION
2 - 17
(3) Sample program
The following shows a sample program for sending e-mails by the programmable
controller CPU.
Perform e-mail send processing using the send command (X20).
The contents of the send data are shown in (4).
Processing program when normal completion
Processing program when abnormal completion
REMARKS
When an error occurs while sending e-mail from the sending mail server to an
external device, an error code is stored in the receiving error log area.
When I/O signals of the Ethernet module are X/Y00 to X/Y1F.
MELSEC-Q/L
Designate ASCII as the send
data format.
Designate the send destination
number.
Designate the send data length.
Designate the subject length.
Designate subject.
Designate the attached file.
Send the e-mail.
2 - 17