Panasonic PT-RS30K Service Manual page 9

PREFACE
r Compatible signal
2.3. Applicable scanning frequency
For details of the types of video signals that can be used with the projector, refer to "List of compatible signals"
Refer to "List of compatible signals" for the type of video signals that can be used with the projector.
(x page 225).
Video signal input, Y/C signal input
Horizontal: 15.73 kHz, Vertical: 59.94 Hz; Horizontal: 15.63 kHz, Vertical: 50 Hz
RGB signal input
f Resolution: 640 x 400 to 1 920 x 1 200
f Dot clock frequency: 162 MHz or less
f PIAS (Panasonic Intelligent Auto Scanning) system
YC C /YP P signal input
B R B R
f Resolution: 480i/576i to 1 920 x 1 080
f Dot clock frequency: 148.5 MHz or less
f The SYNC/HD and VD terminals do not support 3 value SYNC.
DVI-D signal input
f Moving image signal resolution: 480i
Still image signal resolution: 640 x 400 to 1 920 x 1 200 (non-interlace)
f Dot clock frequency: 25 MHz to 162 MHz
HDMI signal input
f Moving image signal resolution: 480i
Still image signal resolution: 640 x 400 to 1 920 x 1 200 (non-interlace)
f Dot clock frequency: 25 MHz to 162 MHz
SDI signal input
SD-SDI signal
HD-SDI signal
3G-SDI signal
*1 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
Note
f DIGITAL LINK input compatible signal is the same as HDMI input compatible signal.
Chapter 7 Appendix — Specifications
/576i to 1 920 x 1 080
*1 *1
/576i to 1 920 x 1 080
*1 *1
9
<RZ31K/RS30K>
ENGLISH - 235