SECTION 3 ADJUSTMENTS
3. Select [Setting] of [Option] menu, then select connection method and enter the setting information of the projector.
Serial terminal connection
• Select [SERIAL] menu and set up the Serial Port, Baudrate and Parity of the PC
LAN terminal connection
• Select [LAN] menu and set up the IP address, Username, Password and Command Port of the projector.
[Note] • If the Username and Password has been changed, please select serial terminal connection
4. Select a model number and ID.
SERIAL
LAN
ADJ-8
<RZ31K/RS30K>
items
Default value
Port
–
Baud Rate
9600bps
Parity
None
IP Address
192.168.0.8
Username
admin1
Password
panasonic
Command Port
1024