Panasonic PT-RS30K Service Manual page 116

SECTION 3 ADJUSTMENTS
1. 3. 4. Restore the backup EEPROM data (After circuit board replace)
1. Switch the projector to "Normal-Standby" mode (STANDBY/ON indicator is lighting in red).
2. Start up service software [DataLogBackup.exe] with a computer.
3. Select [Setting] of [Option] menu, then select connection method and enter the setting information of the projector.
4. Select a model number and ID.
5. Select the "Backup (EEPROM)" tab and put a checkmark to the "REPLACE A-PWB" of "COPY MODE" item.
Then click the [WRITE EEPROM] button.
6. Select the saved file and click [OPEN(O)] button.
7. Once the progress bar reaches the right side end, it is a write completion of the data.
• [WRITE EEPROM] button and [READ EEPROM] button will return to normal display from gray.
8. Select the "Quit" of "File" menu and quit the software.
9. Restart the main power of projector and check that it operates properly.
j
k
l
ADJ-10
<RZ31K/RS30K>