Panasonic PT-RS30K Service Manual page 31

SECTION 1 SERVICE INFORMATION
(4) The following items are added to the sub menu "STATUS ".
1) Page 2
- VERTICAL TILT
- HORIZONTAL TILT
- P.SENSOR
2) Page 4
- LIGHT DRIVE MODE
BRIGHTNESS PRIORITY
3) Page 7
• Displays SDI signal information (No signal is displayed with "---").
- MODE
- TRANSPORT
- PICTURE
- RATE
- SAMPLING
- BIT DEPTH
Vertical angle
Horizontal angle
Luminance sensor detected value
Light source used time in brightness priority mode
Mode ([NO SIGNAL], [SD-SDI], [HD-SDI], [3G-SDI])
Conversion method ([PROGRESSIVE], [INTERLACED])
Picture information ([PROGRESSIVE], [INTERLACED])
Rate information ([23.98], [24.00], [25.00], [29.97], [30.00],
[48.00], [50.00], [59.94], [60.00])
Sampling information
([4:2:2 (YPBPR)], [4:2:2 (YCBCR)], [4:4:4 (YPBPR)], [4:4:4
(YCBCR)], 4:4:4 (RGB)], [4:4:4:4 (YPBPR+A)], [4:4:4:4
(RGB+A)])
Bit depth ([8bit], [10bit], [12bit])
INF-21
<RZ31K/RS30K>