SECTION 1 SERVICE INFORMATION
3. 3. 2. Additional function of each menu
1. [PICTURE] menu
• [AI WINDOW] is added to the setting of the sub menu [DYNAMIC CONTRAST].
Sets up the APL detective area. (AUTO/MANUAL, further settings are available in MANUAL mode)
2. [POSITION] menu
• [DVI EQUALIZER] is added to a sub menu.
When noise contamination to DVI input caused by long cable or external device, set this item so that the noise decreas-
es. (AUTO/LOW/MID/HIGH)
3. [DISPLAY OPTION] menu
• The following items are added to [SDI IN] sub menu.
[XYZ TO RGB SETTING]
- FACTORY SETTING : Uses the value of FACTORY Yxy conversion factor to the original data of XYZ → RGB.
- MEASURED : Uses the value of MEASURED Yxy conversion factor to the original data of XYZ → RGB.
- REC709 : Uses the value of REC709 Yxy conversion factor to the original data of XYZ → RGB.
- DCI P3 : Uses the value of DCI P3 Yxy conversion factor to the original data of XYZ → RGB.
[XYZ TEST PATTERN]
- WHITE : 10% ~ 100%
- DARK GRAY : 1 ~ 10
- COLOR : Red/Green/Blue/Cyan/Magenta/Yellow of 1 ~ 2
INF-19
<RZ31K/RS30K>