Assign Functions To The Buttons And Slider; Set Up The Lcd Display - Delta eZV-440 Application Manual

LINKnet I/O Tab
Function
MonitoringOnly
2. If you selected OccupancyDetection, in the additional settings, in the MotionOvrdTime field,
enter how long the occupancy override should last. This setting allows the use of momentary
contact style occupancy signals.
If you are using maintained-contact occupancy devices, enter zero in this field. In this case,
occupancy statue is only based on contact position.

Assign Functions to the Buttons and Slider

See Assigning Buttons and Slider Elements On eZNS-T100 Network

Set Up the LCD Display

You can select which icons are displayed on the network sensor's LCD screen.
1. In the Display Options section, next to Occupancy, select the occupancy symbols you would
like displayed on the LCD screen.
Display
Option
NotDisplayed_
ManInHouse_
SunMoon_
2. In the Display Setpoints, select how the setpoint of the current heating or cooling stage is
displayed on the LCD screen.
Display
Option
On Button
Press
Always
Page 40 of 84
Select this option if:
Input object BI1005 created but its value will not be used by the
internal algorithm.
Select this option if you are setting up:
No occupancy status to be displayed.
Occupancy status: when a room is occupied, the man in a house icon
is displayed; when the room is unoccupied the icon changes so that
the man appears outside the house. When the occupancy sensor is
disabled, neither icon is displayed.
Sun or Moon icon to be displayed. These icons can be used to show
day and night occupancy modes.
Select this option if you are setting up:
The setpoint is displayed when the Temp Select, Temp Up or Temp
Down buttons are pressed.
The setpoint is always displayed on the LCD in occupied mode.
Sensor.
eZV-440 Application Guide
Edition 2.6