Eco Mode Setback (Ecomodesetback); Standby Setback (Standbysetback); Discharge Air Temperature Limiting Setpoint Differentials; Discharge Air Temperature High Limit Setpoint Differential (Dathilimitsetpointdiff) - Delta eZV-440 Application Manual

When a zero value is entered in this field, there is no offset and you will not be able to enter a
setpoint offset on the LINKnet tab nor will a user will able to adjust the setpoint at a stat interface.

Eco Mode Setback (EcoModeSetBack)

The setback amount when the network sensor is in Eco mode.
For example, when you enter a value of 1.0, the setback is -1.0 from the heating setpoint and +1.0
from the cooling setpoint.

Standby Setback (StandbySetback)

The setback amount when the network sensor is in Standby occupancy mode.
For example, when you enter a value of 1.0, the setback is -1.0 from the heating setpoint and +1.0
from the cooling setpoint.

Discharge Air Temperature Limiting Setpoint Differentials

These setpoint fields are only enabled if you had configured a discharge air temperature sensor on
the Local Inputs tab.

Discharge Air Temperature High Limit Setpoint Differential (DATHiLimitSetpointDiff)

Discharge Air Temperature High Limit Setpoint Differential. Used to calculate the maximum limit
above the CurrentHeatSetPoint (AV800) maintained by the enteliZONE algorithm during ducted
heating stages.

Discharge Air Temperature Low Limit Setpoint Differential (DATLowLimitSetpointDiff)

Discharge Air Temperature Low Limit Setpoint Differential. Used to calculate the minimum limit
below the CurrentCoolSetpoint (AV801) maintained by the enteliZONE algorithm during ducted
cooling stages.

VAV/VVT Setpoints

VAV Box Size (VAVBoxSize)

This is the size of the VAV box. The options include 4, 5, 6, 8, 10, 12, 14, 16, 24x16, 28x14, 32x16
inches. Not available for VVT applications.
Note: Changing the box size value will restore the system to its default setpoints and erase any air
balancing adjustments entered.
eZV-440 Application Guide
Edition 2.6
Page 51 of 84