Procedure - Configuring Alarms And Assigning Setpoints - Emerson Rosemount MCL-220 Manual

Programming the transmitter
Synchronize
timer
6.4.3

Procedure - configuring alarms and assigning setpoints

Complete the following steps to configure the alarms and assign setpoints.
1.
2.
3.
36
Figure 6-3:
The numbers in parentheses are the allowed values for each timer parameter.
If two or more relays are being used as interval timers, choosing
synchronize timers will cause each timer to start one minute later than
the preceding timer.
Press MENU.
The main Menu screen appears.
Move the cursor to Program and press ENTER.
Choose Alarms.
Operation of the Interval Timer
Rosemount MCL