Table of Contents
Advertisement
5
Display and operation
5.1
Display
The transmitter has a four line display.
See
Figure
Section
Figure 5-1:
When the transmitter is being programmed or calibrated, the display changes to a screen
similar to the one shown in
the screen. The rest of the display shows programming and calibration information.
Programming items appear in lists. The screen can only show four items at a time, and the
arrow bar at the right of the screen indicates whether there are additional items in the list.
See
Figure 5-3
Figure 5-2:
The position of the cursor is shown in reverse video. See
Instruction Manual
5-1. The display can be customized to meet your requirements. Refer to
5.6.
Main Display
Figure
for an explanation of the arrow bar.
Programming Screen Showing Item List
5-2. The live readings appear in small font at the top of
Section 5.2
and
Display and operation
Section 5.3
for more information.
17
Advertisement
Table of Contents
Troubleshooting
