Emerson Rosemount MCL-220 Manual page 24

Wiring
6.
7.
8.
9.
16
Insert the new cable through the gland and pull the cable through the cable slot.
Wire the sensor to the signal board.
See Figure 4-3.
Figure 4-3: Rosemount 499ACL-03-54-60 Sensor Wiring to Rosemount 1056
Transmitter
Once the cable has been connected to the board, slide the board fully into the
enclosure while taking up the excess cable through the cable gland.
Tighten the gland nut to secure the cable and ensure a sealed enclosure.
Rosemount MCL