Procedure - Ranging Outputs - Emerson Rosemount MCL-220 Manual

5.
6.
7.
8.
6.3.4

Procedure - ranging outputs

Complete the following steps to range the outputs by assigning values to the low and high
outputs.
1.
2.
3.
Instruction Manual
Choose Output 1 or Output 2.
The screen shows the present configuration. There are six items: Assign (S1 is sensor
1), Range, Scale, Dampening, Fault Mode, and Fault Value. To display the fifth and sixth
items, scroll to the bottom of the screen and continue scrolling.
To make a change, move the cursor to the desired line and press ENTER.
A screen appears in which the present setting can be edited.
Press ENTER to store the setting.
For an explanation of terms, see
To return to the main display, press MENU and then EXIT.
Press MENU.
The main Menu screen appears.
Move the cursor to Program and press ENTER.
The cursor is on Outputs.
Press ENTER.
Section 6.3.1 and Section
Programming the transmitter
6.3.2.
31