Table of Contents
Advertisement
3
Installation
3.1
Unpacking and inspection
Complete the following steps when you unpack your instrument.
1.
2.
3.
4.
3.1.1
Rosemount MCL-220
The Rosemount MCL-220 consists of the following items mounted on a back plate.
1.
2.
3.
3.2
Installation
3.2.1
General information
1.
2.
3.
4.
5.
Instruction Manual
Inspect the shipping container. If there is damage, contact the shipper immediately
for instructions.
Save the box.
If there is no apparent damage, unpack the container.
Ensure that all items shown on the packing list are present. If items are missing,
notify Rosemount immediately.
The Rosemount 1056-03-24-38-AN with sensor cable attached.
Constant head overflow sampler with flow cell for monochloramine sensor.
The monochloramine sensor (Rosemount 499ACL-03-54-VP), three membrane
assemblies, and a bottle of electrolyte solution are in a separate package.
Although the system is suitable for outdoor use, do not install it in direct sunlight or
in areas of extreme temperature.
CAUTION!
HAZARDOUS AREAS
The Rosemount MCL is not suitable for use in hazardous areas.
To keep the transmitter enclosure watertight, install plugs (provided) in the unused
conduit openings.
Install the system in an area where vibrations and electromagnetic and radio
frequency interference are minimized or absent.
Keep the transmittter and sensor wiring at least one foot from high voltage
conductors. Be sure there is easy access to the transmitter and sample conditioning
system.
Be sure there is easy access to the transmitter and sensor.
Installation
9
Advertisement
Table of Contents
Troubleshooting
