Shopturn Open (Pcu 50.3) - Siemens SINUMERIK 840D sl Commissioning Manual

11/2006
10.3

ShopTurn Open (PCU 50.3)

10.3.1 Basic menu bar
Jump into
application
Return
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopTurn – 11/2006 Edition
In ShopTurn Open, the HMI Advanced operating areas "Parameter" (without
tool management and zero offsets), "Services", "Diagnosis", and "Start–up" are
located on the extended horizontal softkey bar.
References: User's Guide HMI Programming Package Part 1 (BN)
There are various methods by which you can integrate Windows applications
into the basic menu bar:
S
Horizontal softkey 4, i.e. the Messages/Alarms operating area is replaced
S
User–assignable softkeys 7 and 8
S
User–assignable softkeys 1 to 8 in the extended horizontal softkey menu
There are 3 methods by which you can jump from the Windows application to
another operating area:
S
Using the "Menu Select" key on the operator panel, you can return to the
basic menu bar and then select another operating area via a softkey.
S
You can configure the keys "Position", "Program", "Offset", "Program Man-
ager", "Alarm" and "Custom" on the operator panel to branch directly into
another operating area or sub–menu.
S
You can configure so–called "PLC keys" to branch into another operating
area or sub–menu.
References: /IAM/, Commissioning Manual CNC Part 2 (HMI),
SINUMERIK 840D sl/840D/840Di/810D,
BE1 Operator Interface Extension,
keyword "OP Hotkeys" and "PLC Keys"
10 Customized User Interface
10.3 ShopTurn Open (PCU 50.3)
10-161