Siemens SINUMERIK 840D sl Commissioning Manual page 49

11/2006
9478
MD number
Standard value: 1
Change becomes effective after: POWER ON
Data type: LONG
Significance:
9550
MD number
Standard value: 1
Change becomes effective after: IMMEDIATELY
Data type: DOUBLE
Significance:
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopTurn – 11/2006 Edition
$MM_TO_OPTION_MASK
Settings for ShopTurn
Min. input limit: 0000
Protection level: 1
Bit 0: Display tool parameters "Number of teeth", "Spindle" and "Coolant" in the tool mana-
gement.
Bit 1: Reserved
Bit 2: Display additional list in the tool management.
Bit 3: Disable creation of new tools directly on a magazine location.
Bit 4 to bit 6: Reserved
Bit 7: Disable editing of tool parameters (tool type, tool name) if the tools are in the maga-
zine.
Bit 8: Evaluate file TO_TURN.INI for configuration of the tool management user interface.
Bit 9: Disable loading/unloading of tools if a program is being executed on the machine.
Bit 10: Calculate by adding tool wear entries.
Bit 11 and bit 12: Reserved
Bit 13: Display intermediate memory (spindle and dual gripper).
Bit 14: Reserved
Bit 15: Disable loading/unloading of tools in/out of spindles.
Bit 16: Do not delete tool wear when entering a geometric value.
Bit 17: Hide tool relocation
Bit 18: Hide magazine positioning.
Bit 19: With Multifix steel holder, tool can be selected in tool list.
Bit 20: Spindle is loaded directly.
Bit 21: Basic length is displayed in "Tool orientation" detail display.
Bit 22: 3D and edge probes not unloaded with "Unload all" function.
Bit 23: Reserved
Bit 24: Position magazine in tool wear list.
$MM_CTM_CYC_ROUGH_RELEASE_DIST
Retraction distance for stock removal at a contour
Min. input limit: 0
Protection level: 3/4
This MD is used to stipulate the distance by which both axes are lifted off the contour du-
ring rough cutting operations. This value also applies to stock removal, plunge–cutting, and
groove turning.
7.2 Display machine data for ShopTurn
Max. input limit: FFFF
Valid as of software version
ShopTurn 7.1
Max. input limit: 10
Valid as of software version:
ShopTurn 6.3
7 Machine Data
Units: Hex
Units: mm
7-49