Siemens SINUMERIK 840D sl Commissioning Manual page 121

11/2006
Magazine location
type, OEM
parameter,
magazine
locations of the
buffer
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopTurn – 11/2006 Edition
Table 8-6 Text assignment
Text type
Cursor text parameter TPC5
Column header parameter TPC6
Cursor text parameter TPC6
Column header parameter TPC7
Cursor text parameter TPC7
Column header parameter TPC8
Cursor text parameter TPC8
Column header parameter TPC9
Cursor text parameter TPC9
Column header parameter TPC10
Cursor text parameter TPC10
Example:
89924 0 0 "Tool data"
The texts must not exceed the following number of characters:
Softkey: 6
List header: 20
Column header parameter: 7
Cursor text parameter: 45
A line break in the softkey text can be made by inserting two consecutive
blanks.
Note
The columns for parameters TPC1 and TPC2 are already preset with example
texts; these can be modified.
The texts for the magazine locations of the buffer and the cursor texts for the
parameter, magazine location type and OEM parameter must be located as
toggle field in the number range 89700 bis 89899.
8 Tool Management
8.8 Configuring the operator interface
Text number
89950
89943, 89944, 89945
89951
89956, 89957, 89958
89966
89946, 89947, 89948
89952
89959, 89960, 89961
89967
89962, 89963, 89964
89968
8-121