Shopmill Open (Pcu 50.3) - Siemens SINUMERIK 840DE sl Commissioning Manual

10 Customer–Specific Operator Interface
10.3

ShopMill Open (PCU 50.3)

10.3 ShopMill Open (PCU 50.3)
10.3.1 Basic menu bar
Jump into
application
Return
10-154
For ShopMill Open, the HMI advanced operating areas "Parameter" (without
tool management and work offsets), "Services", "Diagnosis" and "Startup" are
located on the expanded horizontal softkey bar.
The extended horizontal softkey bar also includes the "Machine Service" and
"Exit" softkeys for startup/diagnosis. These two softkeys are visible only when
protection level 1 is selected.
In addition, in ShopMill Open you can integrate Windows applications in the
standard menu bar via softkeys.
You must also install the Windows applications in the OEM directory and define
them in the REGIE.INI file. This does not apply to Siemens additional products.
You must install those in the ADD_ON directory. See the ShopMill CD–ROM:
References: User's Guide HMI Programming Package Part 1 (BN)
There are various methods by which you can integrate Windows applications
into the basic menu bar:
S
Horizontal softkey 4, i.e. the Messages/Alarms operating area is replaced
S
User–assignable softkeys 7 and 8
S
User–assignable softkeys 1 to 8 in the extended horizontal softkey menu
There are 3 methods by which you can jump from the Windows application to
another operating area:
S
Using the "Menu Select" key on the operator panel, you can return to the
basic menu bar and then select another operating area via a softkey.
S
You can configure the keys "Position", "Program", "Offset", "Program Man-
ager", "Alarm" and "Custom" on the operator panel to branch directly into
another operating area or sub–menu.
S
You can configure so–called "PLC keys" to branch into another operating
area or sub–menu.
References: /IAM/, Commissioning Manual CNC: Basic software and
HMI Advanced, SINUMERIK 840D sl/840D/840Di/810D,
/IHE/, Commissioning Manual CNC: Basic software and
HMI Embedded, SINUMERIK 840D sl,
keyword "OP hotkeys" and "PLC keys"
SINUMERIK 840D sl Commissioning Manual CNC: ShopMill – 11/2006 Edition
BE1 Operator interface extension
BE1 Operator interface extension
© Siemens AG 2006 All Rights Reserved
11/2006