Menu Features And Programming Instructions - Jacuzzi J-200 Series Owner's Manual

J-200
3. Status:
• Cyan light - breathing (slow pulsing) indicates the status is good.
• Cyan light - flashing indicates that the system is completing a
connection to the cloud.
• Green light - flashing indicates waiting for a connection to the
cellular tower.
• Dark blue light - flashing indicates a SIM error.
4. Cell signal strength:
• 3 blue LED lights indicates cell signal strength.
C. Resetting the SmartTub™ controller
Should the SmartTub™ controller need to be reset, hold the magnet
(located on the cord) to the reset lable on the side of the SmartTub
device.
11.0

Menu Features and Programming Instructions

Your hot tub is equipped with menus that allow you to program additional
features. By continually pressing the Menu (
through the menus as follows (Figure 11.0a):
Current temperature (Main Menu)
Primary Filtration (page 31)
Heat (page 31)
Filter Change (page 32)
UV (page 33)
H2O (page 33)
Time (page 34)
Date (page 34)
Temp (page 34)
Language (page 35)
Lock (page 35)
WiFi (not applicable)
Elog (End of Menu)
30
) button you will cycle
Figure 11.0a