Control Functions; Control Panel - Jacuzzi J-200 Series Owner's Manual

9.0

Control Functions

9.1

Control Panel

A. Menu (
to the programming menus.
B. LCD Display: Can display current wa-
ter temperature (default display), water
temperature set point, selected menu functions, and error messages.
Displays a CLEARRAY icon (
those features are on.
C. Warmer Button (
Increments of 1°F or 0.5°C.
D. Cooler Button (
Increments of 1°F or 0.5°C.
E. Jets 1 Button (
low speed; press a second time for high speed; press a third time to
turn pump off.
F. Jets 2 Button (
Press once to turn pump #2 on; press a second time to turn pump #2
off.
G. Light Button (
lights (if equipped) on in one of three random modes or one of seven
solid colors. Refer to Section 10.3 (page 27) for details.
Operation Details
• Temperature Adjustment: 65 to 104°F (18 to 40°C). Factory default
setting is 100°F (38°C).
• LED light system: All LED lights run for 2 hour and then automatically
shut off.
• Jets 1/Jets 2 Button Operation: Jets run for 20 minutes when
activated, then turn off automatically to conserve energy. Simply
press either jets button to continue operation for an additional 20
minutes.
) Button: Allows access
): Increases water temperature set point.
): Decreases water temperature set point.
): Turns jets pump #1 on and off. Press once for
1
): Turns high-speed jets pump #2 on and off.
2
): Turns underwater light (if equipped) and accent
C
A
B
D
2-pump control panel shown
) and heat icon (
J-200
E
1
G
2
F
) when
23