Programming The Temperature Format; Programming The Language; Programming The Lock Feature - Jacuzzi J-200 Series Owner's Manual

1. Press until you get to the "TEMP" Menu. The display will scroll
"TEMPERATURE FORMAT." After the second scroll, if no action is
taken, the system will revert back to the Main Menu.
2. Press or
press to save the change. The system will return to the
1
"TEMPERATURE FORMAT" Menu.
11.9

Programming the Language

Your new hot tub comes with four language display options.
To program the display language, follow the steps below:
Note: If no button is pressed within 5 seconds of each selection the
screen will revert back to the Main Menu and the current settings will
remain active.
1. Press until you get to the "LANG" Menu. The display will scroll
"LANGUAGE MENU." After the second scroll, if no action is taken,
the system will revert back to the Main Menu.
2. Press or
3. Press or
choices are English, French, German and Spanish. Once a selection
is made, press
"LANGUAGE MENU."
11.10

Programming the Lock Feature

You can prevent users from changing certain features of the
hot tub. It is important to realize that after either mode is
enabled, there is no physical pad lock indicator on the topside
control panel display to inform the user that either mode is active. If
some or all topside control panel buttons are non-responsive, either lock
mode IS ENABLED. The lock modes to choice from are:
Note: If no button is pressed within 5 seconds of each selection the
screen will revert back to the Main Menu and the current settings will
remain active.
• Access Lock will disable the ability to manually activate or adjust any
feature of the hot tub. All scheduled operations will still be performed.
• Settings Lock will disable the ability to change any of the user
settings. You can still activate the jet pumps and lighting. All
scheduled operations will still be performed.
• Set Temperature Lock will disable the temperature up and down
buttons to prevent unauthorized temperature adjustments.
• Service Lock all spa functions are locked to allow for a service mode
such as filter cleaning.
Note: This mode has a time out of 2 hours. The spa should not be
left in this lock mode for an extended period. Especially in colder
climate or when freezing conditions exist.
to switch between °F or °C. Once selected
to display the current language.
to scroll through the languages available. The
to save the change. The system will return to the
1
J-200
35