Electronic Device Connections And Functions - Jacuzzi J-200 Series Owner's Manual

J-200
18.1

Electronic Device Connections and Functions

A. Connecting Your Auxiliary Device Using the 3.5 mm Cable
(purchased separately):
1. Plug one end of the cable to "Aux" connection on the
stereo, Figure A.
2. Plug the other end of the cable into the head phone
jack connection on the Auxiliary device.
3. When the stereo detects an audio signal from the
Auxiliary device it will begin to play.
4. All operations are conducted via the Auxiliary device.
CAUTION
EQUIPMENT DAMAGE!
Never install, remove or operate any electrical device (AUX/
Bluetooth) while hands are wet or while sitting partially or fully
immersed in the spa!
B. Connecting Your Bluetooth Device:
1. Turn power "ON" to the stereo unit.
2. From your Bluetooth device, make sure the Bluetooth setting is "ON."
3. Follow the pairing instructions for your Bluetooth device and connect
to the "BLUEWAVE" device that appears on your screen.
4. If asked for a password, enter the code "0000."
5. All operations are conducted via the Bluetooth device.
58
:
RISK OF ELECTRICAL SHOCK OR
AUX
Figure A