Hub Lock Solenoid And Hub Release Lever Removal - IBM 9348 Service Information

- - - -
- - - - - - - - -
Hub Lock Solenoid and Hub Release Lever
erno oval^
Place the tape unit in the service
position; see "Placing the 9348 in
the Service Position" on page 3-1.
Remove the two solenoid power
cables.
These power cables can be dis-
connected at a clip connection
near the supply motor.
Remove the TORX (T25) screw that
holds the solenoid to the casting.
Chapter 3. Service Procedures
3-97