Front Panel Assembly Installation - IBM 9348 Service Information

Front Panel Assembly Installation
Use this procedure to install the
control panel card, door interlock
microswitches, o r door solenoid.
If the control panel card was
removed, install the control panel
card. Insert the card under the
two clips on the left, and then
insert and tighten two TORX (T9)
screws on the right.
Ensure that the door interlock
microswitch lever is behind the
door flag.
Top Cover Front Door
Power
Interlock Interlock
Switch
Microswitches Microswitch
I
I
Chapter
3.
Service Procedures
3-35