•
•
B
•
Setting Tab Stops (emulation)
Setting tab stops
1
Using the
Cursor Move
keys (4-
-+),
move the cursor to the desired
tab-stop location on the scale line.
2
Then press the
Tab -+
key.
The tab stop is set and displayed in reverse video.
Resetting tab stops
1
Using the
Cursor Move
keys (4-
-+),
move the cursor to the desired
tab-stop location on the scale line (displayed in reverse video).
2
Then press the
Tab -+
key.
The tab stop is cleared and the video returns to normal .
Clearing all tab stops
Press either
Numeric 0
key.
SeHing default tab stops
Press either
Numeric
8 key.
Tab stops are set every eight columns.
To exit this mode, press and hold the etrl key; then press the
Tabs key.
If you want to save the tab settings that you have made here, perform the Save
operation in the FUNCTION menu .
Chapter 2. Setup Procedures
2-35