•
•
•
•
If your primary use of the display station is to emulate the DEC
VT220 and the secondary use is an IBM mode operation, go to
page 2-8 (Step 3A).
If your primary use of the display station is a SYSTEM ATTACH
mode operation and the secondary use is to emulate the DEC
VT220, go to page 2-11 (Step 3B).
If your primary use of the display station is an IBM 3151 or IBM
3101 mode operation and the secondary use is to emulate the
DEC VT220, skip steps 3A and 3B; go to page 2-14 (Step 4).
Chapter 2. Setup Procedures
2-7