•
•
•
Reference Information (SYSTEM ATTACH)
SYSTEM ATTACH Mode
Host Commands
This section describes the 3151 commands and responses that are different when
used in SYSTEM A IT ACH mode. They are:
•
Set/Read Control 1 commands/response
•
Set/Read Control 2 commands/response
•
Set/Read Control 4 commands/response
•
Set/Read Control 5 commands/response
•
Set/Read Control 7 commands/response
•
Write Host Message command.
The other 3151 commands and responses are not changed. For the commands
and responses that are not shown here, see "Commands and Responses" in IBM
3151 ASCII Display Station Reference Manual .
Chapter 5. Reference Information
5-11