Table of Contents
Advertisement
Introduction
Key
Function
•
Cancel
Cancels the print operation that was requested by the host
command, Print key, or Auto Print setting.
This key also erases the message AUX NOT READY from the
operator information area.
Note:
This function is not effective when CONTROLLER is
selected for the Print Mode option.
DefF
Defines functions from the keyboard. See "Defining Function
Keys (emulation)" on page 2-32.
ESC
Is used to key in an ESC sequence from the keyboard.
Machine
Is used to switch the mode from IBM to DEC and vice versa.
Mode
Switch
Msg
Each time the Msg key is pressed, the content of the OIA
changes. At first the OIA displays operator messages; the first
time the Msg key is pressed, the OIA indication turns off; the
•
next time the Msg key is pressed, the OIA displays operator
messages again.
Whether or not to display operator messages in the OIA is
saved for later use.
Tabs
Sets tab stops from the keyboard. See "Setting Tab Stops
(emulation)" on page 2-34.
Figure 1-4 (Part 2 of 3). Additional Keyboard Functions
in
Emulation Mode
•
Chapter
1.
Introducing the U.S. English Cartridge to Emulate IBM and DEC Terminals
1-11
Advertisement
Table of Contents
