IBM 3151 User Manual page 55

Step 12B. Defining Setup Values (IBM Mode)
b
Refer to Figure 3-20 on page 3-30; select the field and change
the value, if needed.
1
Using the Cursor Move keys
(f
~ ~ -+), select any field (high-intensity
box) whose value you want to change.
2
Press the Space Bar to display each value. Do this until the desired value
appears.
3
Repeat steps 1 and 2 until you have changed all necessary values.
Note: For the Term. ID message, key in the characters (up to 20
characters) instead of pressing the Space Bar.
4
Select the next menu by pressing the Send key, and change all necessary
values. Follow the same procedures for all menus
(GENERAL,
COMMUNICATION, KEYBOARD/PRINTER),
except the
FUNCTION
menu, which has different purposes.
o
0000 0000 0000 000
t
t
I
Ctrl Space Bar
Send Cursor Move Setup
H You Need Help
If you do not understand the above procedures, see "How to Define Setup
Values" on page
3-33
for a more detailed explanation.
2-30
User's Guide for the Cartridge
to
Emulate
IBM
and DEC Terminals