Defining Function Keys (Emulation) - IBM 3151 User Manual

Defining Function Keys (emulation)
Defining Function Keys (emulation)
; "
You can define function keys
F6
through
F20
from the keyboard or by the host
~j
A
command, however, the definitions will be lost when power is turned off.
ESC sequences, CSI sequences in 7-bit extended form, or character strings can be
assigned to each function key.
Figure 2-3 shows location of the keys used for this step.
• 0000
~~~~ ~B~~ ~~~
Ctrl ESC (Oef F)
{HI'P){Do)
888
o
BOD
II
i
Enter
Figure 1~3. Keys Used for Defming Function Keys (emulation)
Press and hold the Cirl key; then press the Def F key.
The/unction key menu should appear as shown below.
a
b
a: A two-digit number (06 through 20) of a function key is entered here.
b: The function is entered here (up to 70 characters).
2~32
User's Guide for the Cartridge to Emulate IBM and DEC Terminals
/-\
(
.
\
:
'"
/