Software Package - Mitsubishi Electric MELCEC Q Series User Manual

2. SYSTEM CONFIGURATION
2.2.2

Software package

(1) GPP function software packages and model name setting at the start-up
The following table shows the GPP function software package that can be used to
create the QCPU-A program, and the programmable controller type setting at start-
up.
When using SW4D5C-GPPW or later, select the programmable controller type from
Q02(H)-A or Q06H-A according to the CPU to be used.
When using the peripheral devices and GPP function software package of SW3D5C-
GPPW or earlier, specify the programmable controller type name as "A4U". If "A4U"
is not found in PLC type names, specify "A3A." If both "A4U" and "A3A" are not
found, specify "A3H."
Note that when "A4U" is specified, the available device range is limited.
Peripheral
Software package for system start-up
device
PC/AT SW4D5C-GPPW or later
personal
SW3D5
computer
SW
A6PHP SW3GP-GPPA
SW4GP-GPPA
SW1GP-GPPAU
A6GPP SW3-GPPA
SW3GP-GPPA
SW4GP-GPPA
SW1GP-GPPAU
-GPPW or earlier
IVD-GPPA
2 - 4
Programmable controller CPU
model setting
Q02(H)-A Q06H-A
Q02(H)-A Q06H-A
A4U A4U
A3H A3H
A3A A3A
A4U A4U
A3H A3H
A3A A3A
A4U A4U