Mitsubishi Electric MELCEC Q Series User Manual page 28

2. SYSTEM CONFIGURATION
2.2.3 Precautions when using GPP function software packages and A8PUE peripheral devices which are
not compatible with AnU
When starting with GPP function software packages not compatible with the AnU, QCPU-
A (starting with the programmable controller model name "A3A" or "A3H") or a A8PUE
peripheral device (including A7PUS), the usable device ranges are limited as follows.
(1)
Item
Instruction (sequence/basic/
application/dedicated)
Program capacity
I/O device points (X/Y)
M, L, S relay
Link relay (B)
Timer (T)
Counter (C)
Data register (D)
Link register (W)
Annunciator (F)
Index register (V, Z)
Expanded comment
Latch (power failure compensation)
range
I/O assignment
(1)
(2)
List of usable device range
AnACPU-compatible Module
Programmable controller Model
"A3A"
at System FD Start-up
X/Y0 to X/Y7FF can be used.
(X/Y800 to X/Y1FFF cannot be used.)
M/L/S0 to M/L/S8191 can be used.
B0 to BFFF can be used.
(B1000 to B1FFF cannot be used.)
T0 to T2047 can be used.
C0 to C1023 can be used.
D0 to D6143 can be used.
(D6144 to D8191 cannot be used.)
W0 to WFFF can be used.
(W1000 to W1FFF cannot be used.)
F0 to F2047 can be used.
V, V1 to V6, Z, Z1 to Z6can be used.
Max. 3968 points
The device range shown above can be latched. The device range shown above can be latched.
Possible to register occupied I/O
points and module model names.
The device range other than listed above is the same as that of QCPU-A.
Refer to Operating Manual for peripheral devices to be used for available functions.
Programmable controller Model
A8PUE
All instructions can be used.
Max. 14k steps can be used for the main program.
(M/L/S2048 to M/L/S8191 cannot be used.)
–
Number of I/O occupied points can
–
2 - 7
A3HCPU-compatible Module
"A3H"
at System FD Start-up
X/Y0 to X/Y7FF can be used.
(X/Y800 to X/Y1FFF cannot be used.)
M/L/S0 to M/L/S2047 can be used.
B0 to B3FF can be used.
(B400 to B1FFF cannot be used.)
T0 to T255 can be used.
(T256 to T2047 cannot be used.)
C0 to C255 can be used.
(C256 to C1023 cannot be used.)
D0 to D1023 can be used.
(D1024 to D8191 cannot be used.)
W0 to W3FF can be used.
(W400 to W1FFF cannot be used.)
F0 to F255 can be used.
(F256 to F2047 cannot be used.)
V and Z can be used.
(V1 to V6, Z1 to Z6 cannot be used.)
Unusable
be registered.
A7PUS
–
–