Mitsubishi Electric MELCEC Q Series User Manual page 218

APPENDICES
Number Name
Consecutive
*2
step transfer
M9103
enable/disable
Consecutive
M9104 transfer
prevention flag
Step transfer
monitoring timer
*2
start
M9108
(corresponds to
D9108)
Step transfer
monitoring timer
*2
start
M9109
(corresponds to
D9109)
Step transfer
monitoring timer
*2
start
M9110
(corresponds to
D9110)
Step transfer
monitoring timer
*2
start
M9111
(corresponds to
D9111)
Step transfer
monitoring timer
*2
start
M9112
(corresponds to
D9112)
Step transfer
monitoring timer
*2
start
M9113
(corresponds to
D9113)
Step transfer
monitoring timer
*2
start
M9114
(corresponds to
D9114)
*: Usable with AnN and AnA which are compatible with SFC.
For the AnN and AnA which are compatible with SFC, refer to the MELSAP-II Programming Manual.
Table App.2.1 Special Relay List (continued)
Description
• Selects consecutive or step-by-step transfer of
OFF:Consecutive step steps of which transfer conditions are established
transfer disable when all of the transfer conditions of consecutive
ON: Consecutive step steps are established.
transfer enable ON:
OFF: One step per one scan is transferred.
• Turned on when consecutive transfer is not
OFF:Transfer complete executed with consecutive transfer enabled.
ON: Transfer Turned off when transfer of one step is completed.
incomplete Consecutive transfer of a step can be prevented by
writing an AND condition to corresponding M9104.
OFF:Monitoring timer
• Turned on when the step transfer monitoring timer
reset
is started. Turned off when the monitoring timer is
ON: Monitoring timer
reset.
reset start
Details
Consecutive transfer is executed.
App - 24
Applicable CPU
Usable with AnN*,
AnA*, AnU,
A2AS, QCPU-A
— (A Mode), A2C,
A0J2H, AnS,
AnSH, A1FX and
A52G.
Usable with AnN*,
AnA*, AnU,
A2AS, QCPU-A
— (A Mode), A2C,
A0J2H, AnS,
AnSH, A1FX and
A52G.
Usable with AnN*,
AnA*, AnU,
A2AS, QCPU-A
— (A Mode), A2C,
A0J2H, AnS,
AnSH, A1FX and
A52G.