Selecting; Changing The Navigation Map Range; Decluttering Map - Garmin G500 Pilot's Manual

Hide thumbs Also See for G500:
Table of Contents

Advertisement

Cover
TOC
Stormscope
Traffic
3.1.3
Selecting Page Options
1. Change the fields or the setup of a page by pressing the MENU key and make
the necessary adjustments with the MFD knobs.
2. Turn the large MFD knob to select desired item.
3. Turn the small MFD knob to change the highlighted value.
4. Press ENT to accept the displayed value.
5. Press the small MFD knob to cancel selection or to end editing.
3.1.4

Changing the Navigation Map Range

The Range (RNG) keys on the right side of the bezel are used to change the
map display range. Pressing the
displayed map range) and pressing the
the displayed map range). The Map Range is shown on the outer range ring. The
map ranges available are from 250 feet to 500 NM.
3.1.5
Decluttering Map Pages
The Map Declutter feature allows the pilot to progressively step through
four levels of decluttering to remove map information. The declutter level is
displayed in the DCLTR soft key.
3-4
Figure 3-4 Map Overlay Icon Samples
RNG key will zoom out (increasing the
Figure 3-5 Map Declutter Soft Key
Garmin G500/G600 Pilot's Guide
Terrain
Obstacle
Wire Obstacle
RNG key will zoom in (decreasing
190-00601-02 Rev. J

Advertisement

Table of Contents
loading

This manual is also suitable for:

G600

Table of Contents