Data Link - Garmin G500 Pilot's Manual

3. Turn the small MFD knob to select the Barometric Setting units and then press
ENT. The Temperature value will now be highlighted.
4. Turn the small MFD knob to select the Temperature units and then press ENT.
3.2.1.10

Data Link

The Data Link WX/TFR Source menu allows users to select the source of
weather that is displayed on the MFD. Only the options that are installed will
be displayed.
To select a weather source:
1. Open the System Setup page of the AUX page group.
2. Press the small MFD knob to activate the cursor.
3. Turn the large MFD knob to highlight the WX/TFR Source field.
4. Turn the small MFD knob to select XM, GFDS, or FIS-B, and then press ENT.
5. Press the small MFD knob to exit adjustments.
190-00601-02 Rev. J
Figure 3-51 Temperature System Display Units
Figure 3-52 WX/TFR Source Options
Garmin G500/G600 Pilot's Guide
TOC Cover
3-37