Traffic Feature Options (Optional) - Garmin G500 Pilot's Manual

Cover TOC
3.1.10.3

Traffic Feature Options (Optional)

The Traffic group selection from the Map Setup Page Menu allows you to
customize the display of traffic on the Navigation Map. The Traffic function
requires the installation of a compatible traffic device.
NOTE: As a decluttering function, t
the map scale is above 15 NM and traffic symbols will not be drawn when
the map scale is above 40 NM.
Traffic Selection
Off
All Traffic
TA/PA
TA Only
Table 3-3 Navigation Map Traffic Display Options
Figure 3-28 Navigation Map Page Menu Traffic Group Selection
1. While viewing the Navigation Map Setup page and the Traffic Group active,
turn the large MFD knob to highlight the "Traffic" options.
2. Turn the small MFD knob to change the highlighted value.
3. Press ENT to accept the displayed value.
4. Press the small MFD knob to cancel selection or to end editing and return to
the Navigation Map page or turn the large MFD knob to the next option.
When the Traffic overlay is active on a Map page, a Traffic icon will be
displayed on the Map page where it is selected.
3-20
raffic
Display Result
No traffic displayed
All types of traffic displayed
Traffic Alerts and Proximity Alerts displayed
Traffic Alerts Only displayed
Garmin G500/G600 Pilot's Guide
labels will not be drawn when
190-00601-02 Rev. J