Setting The Altitude Minimums Alerter - Garmin G500 Pilot's Manual

Cover TOC
4. Turn the small MFD knob to select the desired data item and press ENT.
5. Press the small MFD knob to remove the cursor.
To restore factory default settings for data fields on the Active Flight Plan
Page:
1. While viewing the Active Flight Plan Page of the FPL page group, press MENU
to display the Active Flight Plan Page Options window.
2. Turn the large MFD knob to highlight "Restore Defaults?" and then press ENT.
Figure 3-93 Active Flight Plan Page Menu Option Selection to Restore Defaults
3.3.1.3

Setting the Altitude Minimums Alerter

The Altitude Alerting function provides the pilot with visual and aural alerts
(if interfaced to an audio panel) when approaching the Selected Altitude. For
more details about Minimum Descent Altitude/Decision Height Alerting, refer
to refer to 2.4.4.
1. While viewing the Charts Page of the FPL page group, press the Menu key.
With the Set Minimums item highlighted, press ENT.
2. With the Minimums Source highlighted, select the Altitude Minimums Alerter
source with small MFD knob.
3. Turn the large MFD knob to highlight the Altitude Minimums value. Turn the
large and small MFD knobs to change the Altitude Minimums value.
4. Press ENT to activate the selected value.
3-66
Figure 3-94 Minimums Source Selection
Figure 3-95 Minimums Altitude Selection
Garmin G500/G600 Pilot's Guide 190-00601-02 Rev. J