Displaying And Operating Traffic (Tas/Tcas Systems); Switching From Standby Mode To Operating Modes - Garmin G500 Pilot's Manual

Cover TOC
4.6.1.1

Displaying and Operating Traffic (TAS/TCAS Systems)

The Traffic Map Page shows surrounding TAS/TCAS traffic data in relation
to the aircraft' s current position and altitude. Traffic page orientation is always
heading up. The traffic mode and altitude filter mode are annunciated in the
upper left corner.
Operating Mode
Range Ring
Proximity
Advisory, Aircraft
is 500 ft Above
and Descending
Non-Threat
Traffic,
2000 ft Above
and Climbing
Non-Bearing Traffic (System is Unable to Determine Bearing), Aircraft
Distance is 2.0 NM, 1100 ft Above and Descending
4.6.1.2

Switching from Standby Mode to Operating Modes

The unit must be in operating mode for traffic to be displayed.
1. While viewing the Traffic Page of the MAP page group, select the OPERATE soft
key to select Operating Mode.
2. To switch to Standby Mode from the Traffic Page, select the STANDBY soft key.
NOTE: Not all TAS systems can be controlled from the G500/G600. The
Operate/Standby soft keys may not be displayed. An alert will be generated
when Standby is selected and the aircraft is in the air.
4-32
Figure 4-28 Traffic Map Page - TAS/TCAS
Garmin G500/G600 Pilot's Guide
Traffic Advisory,
200 ft Above and
Descending
Ownship Symbol
Non-Threat Traffic,
2000 ft Below and
Climbing
190-00601-02 Rev. J