Setting The Selected Altitude - Garmin G3X Pilot's Manual

Integrated Autopilot
CHANGING THE SELECTED ALTITUDE
NOTE: Holding the CWS Button (if equipped) while in Selected Altitude Capture
Mode does not cancel the mode.

Setting the selected altitude:

1) From the PFD Page (one display) or PFD (two display), press the ALT/PTCH
Softkey.
2) Turn the FMS Joystick to set the Selected Altitude in 100-ft increments
Use of the FMS Joystick to change the Selected Altitude while Selected
Altitude Capture Mode is active causes the Integrated Autopilot to revert to
Pitch Hold Mode with Selected Altitude Capture Mode armed for the new
Selected Altitude.
266
Altitude Hold
Mode Active
Altitude Hold Mode
Garmin G3X Pilot's Guide
Altitude
Reference
Altitude Hold Mode Softkey
Selected
Altitude
190-01115-00 Rev. G