Ricoh Da-P1 Field Service Manual page 445

010 Bit Switch A Settings
bit 0 DFU
bit 1 DFU
bit 2 DFU
bit 3 DFU
bit 4 DFU
bit 5 Store and Skip Errored Job locks the queue
If this is 1, then after a job is stored using Store and Skip Errored Job (SSEJ), new
jobs cannot be added to the queue until the stored job has been completely printed.
bit 6 Allow use of Store and Skip Errored Job if
connected to an external charge device.
If this is 0, Store and Skip Errored Job (SSEJ) will be automatically disabled if an
external charge device is connected.
Note: We do not officially support enabling this bitsw (1). Use it at your own risk.
bit 7 DFU
1001 [Bit Switch]
Printer Service Mode
0 1
- -
- -
- -
- -
- -
Queue is not
Queue locked
locked after
after SSEJ
SSEJ
Does not
Allows SSEJ
allow SSEJ
with ECD
with ECD
- -
145